LED PWM Ceiling Dimmer, 4-channel, DMX/RDM, 12-48V, 240W (480W @48V)

LED PWM Ceiling Dimmer, 4-channel, DMX/RDM, 12-48V, 240W (480W @48V)

SKU: E10029

Category: LED dimmer

Currently out of stock
Delivery time: 13 Workdays (AT - int. shipments may differ)

108,00 €

incl. 20% VAT , plus

Emilum

12-48V LED dimmer for in-ceiling insertion with 4 PWM outputs, each 60W.

The advantages of a 12-48V PWM dimmer:

Short-circuit-proof – no need for a back-up fuse, the device switches off in the event of a short circuit!
1-4 channel operation with an output power of up to 240W @ 24Vdc and 480W @ 48Vdc
full RDM operation and control
Faders for extremely smooth dimming with 16-bit,
Frequencies up to 1.2kHz adjustable
Dimming curves (gamma)
minimum dimming level of under 0.1% possible
min. max. level adjustable

pcs

Our 4-channel 12-48V ceiling dimmer with PWM output was specially developed for use in smart homes, but of course it can be used in many other areas, such as theaters, general lighting, and much more.

During development, the highest standards were prioritized in every respect.

Our explanatory videos about the 12-48V PWM dimmer:

Operation:
https://youtu.be/PiMQVLzVEww

In the control cabinet:
https://www.youtube.com/watch?v=UXn98iqIMS4

One of the most important aspects is the real short-circuit strength of our DMX LED controller and thus the protection of the installing
company. According to the applicable standard, a pre-fuse with a fuse is not sufficient to ensure 100% building safety. A fuse is a necessary link in the safety chain, which is already built into the dimmer.

Another feature we have added is the excellent properties of the dimming outputs . Lowest dimming level, finest dimming behavior without jerking, high dimming frequencies and much more.

Our RGBW LED controllers are fully parameterizable and commissionable via the bus using RDM using standard RDM programming devices such as ENTECC DMX PRO USB or similar. See "RDM Protokolle.pdf".

This dimmer is part of our extensive LED dimmer & DMX controller product range .

Shipping weight:	0,10 kg
Item weight:	0,09 kg
Leistung:	120W @12V / 240W @24V
Nennspannung:	12-48 Vdc
Schutzart:	IP20
Dimmbar:	Ja (PWM)
Länge:	188mm
Breite:	43mm
Höhe:	23mm
Strom:	10A
Lebensdauer (Ta 25°C):	>50.000h
Schnittstellen:	DMX/RDM, RS-485

Datenblatt

Datenblatt

RDM Telegramme

RDM Telegramme

Loxone

In dieser Beispiel Loxone Config zeigen wir, wie unsere 4 Kanal PWM Dimmer einfach und schnell eingebunden werden können in einem Loxone Miniserver.

stdClass Object
(
    [kMedienDatei] => 169
    [cPfad] => 
    [cURL] => https://www.emilum.com/downloads/loxone/Emilum 4Kanal PWM Dimmer Config.zip
    [cTyp] => .*
    [nSort] => 2
    [cName] => Loxone
    [cBeschreibung] => In dieser Beispiel Loxone Config zeigen wir, wie unsere 4 Kanal PWM Dimmer
einfach und schnell eingebunden werden können in einem 
Loxone Miniserver.
    [kSprache] => 1
    [oMedienDateiAttribut_arr] => Array
        (
        )

    [nErreichbar] => 1
    [cMedienTyp] => Others
    [nMedienTyp] => 4
    [videoType] => 
    [cAttributTab] => 
    [video] => 
)
1

Loxone